EU Rules for Importing Textiles from China
If you sell textiles or accessories from China in the EU, four sets of rules matter most: the General Product Safety Regulation (GPSR), the Textile Labelling Regulation, the substance restrictions under REACH and, depending on company size, the German Supply Chain Act (LkSG) and the EU Corporate Sustainability Due Diligence Directive (CSDDD). This guide summarises the position as of 12 November 2026 and cites the article in the original text for each statement. It is not legal advice.

Who is responsible when importing?
Most obligations depend on your role under EU law. The General Product Safety Regulation (EU) 2023/988, GPSR for short, distinguishes between manufacturer, importer and distributor:
- Manufacturer also means anyone who has a product designed or manufactured and markets it under their own name or trademark (Art. 3(8) GPSR). If you have hoodies with your brand label sewn in China, you are usually the manufacturer within the meaning of the regulation.
- Importer means any person established in the EU who places a product from a third country on the EU market (Art. 3(10) GPSR).
- The Textile Labelling Regulation (EU) No 1007/2011 takes a similar approach: a distributor is considered a manufacturer if it places a product on the market under its name or trademark, attaches the label itself or changes the content of the label (Art. 15(2)).
Before the first order, agree in writing who acts as manufacturer or importer in the EU. With deliveries that the Chinese supplier clears through customs to your door (DDP), this is not always obvious.
What does the General Product Safety Regulation (GPSR) require?
The GPSR has applied since 13 December 2024 (Art. 52) to products intended for consumers or likely to be used by them (Art. 3(1)). It applies only to the extent that no more specific EU law covers the same safety aspects (Art. 2(1)). For clothing, bags, caps or home textiles it is therefore usually the relevant safety regulation. The basic rule: only safe products may be placed on the market (Art. 5).
Manufacturer obligations (Art. 9)
- Carry out an internal risk analysis and draw up technical documentation before placing the product on the market (para. 2). The documentation must be kept for ten years (para. 3).
- The product bears a type, batch or serial number or another element allowing its identification. If size or nature do not allow this, the information goes on the packaging or an accompanying document (para. 5).
- Name or trademark, postal address and email address of the manufacturer appear on the product, or otherwise on the packaging or an accompanying document (para. 6).
- Instructions and safety information are provided in a language easily understood by consumers, as determined by the member state concerned, where the product needs them (para. 7).
Importer obligations (Art. 11)
Before placing a product on the market, the importer checks that it is safe and that the manufacturer has complied with the requirements on risk analysis, identification and contact details (para. 1). The importer also indicates its own name, postal address and email address on the product, or otherwise on the packaging or an accompanying document (para. 3), and keeps a copy of the technical documentation for ten years (para. 6).
Responsible economic operator in the EU (Art. 16)
A product may only be placed on the market if there is an economic operator established in the EU who is responsible for it (Art. 16(1)). Who that can be is set out in Art. 4(2) of the Market Surveillance Regulation (EU) 2019/1020: a manufacturer established in the EU, an importer, an authorised representative appointed in writing or, if none of these is established in the EU, a fulfilment service provider. The name and contact details of this operator appear on the product, its packaging, the parcel or an accompanying document (Art. 16(3)).
Online sales (Art. 19)
Online offers must show the manufacturer with postal and email address, for manufacturers outside the EU also the responsible person in the EU, information identifying the product including a picture, and any warnings or safety information.
What has to be on the textile label?
The Textile Labelling Regulation (EU) No 1007/2011 governs textile fibre names and the indication of fibre composition (Art. 1). It does not require care symbols or size information. It applies to textile products and to products containing at least 80% textile fibres by weight (Art. 2(2)), which includes many bags, caps and scarves.
- Label required: Textile products are labelled or marked with their fibre composition when made available on the market. The labelling must be durable, easily legible, visible and accessible, and a label must be firmly attached (Art. 14(1)).
- Official fibre names only: Only the names listed in Annex I may be used, such as cotton, polyester or elastane (Art. 5(1)). Trade names do not replace the fibre name and may only be placed immediately before or after it (Art. 16(2)).
- All fibres with their share: For blends, all fibres are listed in descending order of weight (Art. 9(1)). Products with several components, such as outer fabric and lining, state the composition of each component (Art. 11(1)).
- "100%" only for pure products: "100%", "pure" or "all" may only be used for products made of a single fibre. Up to 2% of technically unavoidable extraneous fibres is allowed (Art. 7).
- Tolerance: A manufacturing tolerance of 3% between the stated composition and the laboratory result is permitted (Art. 20(3)).
- Animal parts: If a textile contains non-textile parts of animal origin, such as leather patches or fur trim, the label must say "Contains non-textile parts of animal origin" (Art. 12(1)).
- Language: Labels must be in the official language or languages of the member state where the product is made available to consumers (Art. 16(3)). For Germany that means German, and anyone selling into several countries needs multilingual labels.
- Visible before purchase: The composition must be clearly visible to consumers before purchase, including in online shops (Art. 16(1)).
The manufacturer is responsible for the label and its accuracy, and where the manufacturer is not established in the EU, the importer (Art. 15(1)). Have labels sewn in in China to your template and check them during inspection. The European Commission plans to revise the regulation, including digital labels. According to the European Parliament’s Legislative Train (as of 25 October 2026), the proposal was planned for the second quarter of 2026. Until a new regulation is adopted, the current version applies.
Which substances are restricted in textiles under REACH?
Annex XVII of the REACH Regulation (EC) No 1907/2006 lists substances that may not be present in certain products, or only up to a limit. For clothing and accessories these entries matter most:
| Entry | Substance | Limit and scope |
|---|---|---|
| 43 | Azo dyes that release certain aromatic amines | banned above 30 mg/kg in textile and leather articles with direct and prolonged skin contact, such as clothing, bed linen, towels, hats, gloves, handbags |
| 46a | Nonylphenol ethoxylates (NPE) | since 3 February 2021 banned at 0.01% by weight or more in textiles that are washed in water during normal use |
| 72 | Substances that are carcinogenic, mutagenic or toxic for reproduction (CMR), listed in Appendix 12 | since 1 November 2020 in clothing, accessories, textiles in skin contact and footwear for consumers, e.g. formaldehyde from 75 mg/kg |
| 79 | PFHxA, its salts and related substances (a PFAS group) | since 10 October 2026 from 25 ppb (PFHxA and salts) or 1,000 ppb (related substances) in textiles in clothing and accessories and in footwear for the general public, for other textiles from 10 October 2027 |
The recitals to the PFHxA entry name outdoor clothing such as rain jackets as an example. Products placed on the market before 10 October 2026 are exempt from paragraph 1.
In practice, write the limits into the specification or supply contract and have samples tested by an accredited laboratory. A supplier’s test report is only as good as its link to the batch actually delivered.
What applies under the German Supply Chain Act (LkSG)?
The German Supply Chain Due Diligence Act has applied since 2024 to companies that usually employ at least 1,000 people in Germany, before that from 3,000. This is how the competent Federal Office for Economic Affairs and Export Control (BAFA, in German) describes it. Smaller importers are not addressed by the act, but as suppliers to an obligated company they may receive questionnaires or contract clauses. BAFA advises small and medium-sized companies not to give blanket assurances that all human rights are respected throughout the supply chain.
Obligated companies carry out, among other things, an annual and event-driven risk analysis, take preventive measures with direct suppliers and set up a complaints procedure.
Status of the amendments (12 November 2026)
- On 3 September 2025 the German cabinet adopted a bill amending the LkSG (Bundestag printed paper 21/2474). According to the Bundestag’s documentation system DIP (in German), it would abolish the reporting obligation retroactively from the 2023 reporting period and restrict fines. It is explicitly intended as a transitional measure until the CSDDD is transposed into German law.
- The Bundestag held the first reading on 16 January 2026 and referred the bill to committee. DIP lists no final vote, so the act continues to apply in its current version for now.
- BAFA stopped reviewing company reports on 1 October 2025, and reports can no longer be submitted. The other due diligence obligations remain in place.
What changes with the EU due diligence directive (CSDDD)?
Directive (EU) 2024/1760, the Corporate Sustainability Due Diligence Directive, has been amended twice: first by the "stop-the-clock" Directive (EU) 2025/794, which postponed deadlines, and then in substance by the Omnibus I package, Directive (EU) 2026/470. It was published in the Official Journal on 26 February 2026 and entered into force on the twentieth day after publication (Art. 6). The main changes are in Art. 4 of the Omnibus directive:
- Scope: EU companies are only covered if they have more than 5,000 employees on average and a worldwide net turnover of more than EUR 1.5 billion (amended Art. 2(1)(a) CSDDD). For non-EU companies the threshold is a net turnover of more than EUR 1.5 billion in the EU (Art. 2(2)(a)).
- Deadlines: Member states must transpose the directive by 26 July 2028 and apply it from 26 July 2029 (amended Art. 37(1)).
- Fewer requests to smaller suppliers: From business partners with fewer than 5,000 employees, companies in scope may only request information that cannot reasonably be obtained by other means (new Art. 8(2a)).
- Other changes: The obligation to adopt a climate transition plan (Art. 22) has been deleted, as has the EU-wide liability rule in Art. 29(1). The effectiveness of measures must be assessed when there is a significant change, and at least every five years (Art. 15).
For most brands and retailers that have textiles made in China, the CSDDD therefore does not apply directly. They are affected through large customers who pass due diligence requirements on to their suppliers.
Does "Made in China" have to be on the product?
There is currently no general EU obligation to state the country of origin on textiles. The Textile Labelling Regulation only governs fibre composition and mentions origin labelling merely as a topic for the Commission to examine (Art. 24(3)(a)). The GPSR requires the name and address of the manufacturer and importer (Art. 9(6), Art. 11(3)), but not the country of manufacture.
If you do state an origin, it must be correct. Under Art. 6(1)(b) of the Unfair Commercial Practices Directive 2005/29/EC, a commercial practice is misleading if it deceives consumers about the geographical origin of a product. A "Made in Germany" claim on goods sewn in China is therefore risky.
Regardless of the label, customs determines the origin. Under Art. 60(2) of the Union Customs Code, goods whose production involves more than one country are deemed to originate where they underwent their last substantial, economically justified processing or working. For the customs declaration you need an EORI number, because economic operators established in the EU register with the customs authorities (Art. 9(1) UCC).
How do I put this into practice when ordering in China?
These points should be settled and recorded in writing before production:
- Who is manufacturer or importer in the EU, and whose name, address and email appear on the product or packaging?
- A label with the fibre composition using Annex I names, in the language of each target market, sent to the factory as a template.
- A batch or article number on the product or label so that a recall can be narrowed down.
- REACH limits as part of the specification, with laboratory testing before shipment.
- Risk analysis and technical documentation under the GPSR, kept for ten years.
- Product pages in your online shop updated with manufacturer details, fibre composition and warnings.
We coordinate labels with the manufacturer and check them at the factory together with fabric and workmanship, as described on the textiles page. Whether the information is legally sufficient remains your responsibility as manufacturer or importer. How we inspect goods on site is explained on the quality control page, and there is a checklist in the guide textile quality with AQL table. Terms such as EORI, HS code or DDP are explained in the sourcing and import glossary.
Note: not legal advice
This article gives a general overview of the position as of 12 November 2026 and is not legal advice. Laws and deadlines change, especially for the German Supply Chain Act and the CSDDD. Whether and how a rule applies to your product should be clarified case by case with a lawyer or the competent authority. The linked original texts are authoritative.
Sources
- Regulation (EU) 2023/988 on general product safety (GPSR), Art. 2, 3, 5, 9, 11, 16, 19, 52
- Regulation (EU) 2019/1020 on market surveillance and compliance of products, Art. 4
- Regulation (EU) No 1007/2011 on textile fibre names, Art. 1, 2, 5, 7, 9, 11, 12, 14, 15, 16, 20, 24
- European Parliament: Legislative Train, Revision of the textile labelling regulation, as of 25.10.2026
- REACH Regulation (EC) No 1907/2006, Annex XVII: entry 43 as amended by Regulation (EC) No 552/2009, entry 46a by Regulation (EU) 2016/26, entry 72 by Regulation (EU) 2018/1513, entry 79 by Regulation (EU) 2024/2462
- German Supply Chain Due Diligence Act (LkSG) on gesetze-im-internet.de (in German)
- BAFA: Questions and answers on the Supply Chain Act (in German), sections on scope, SMEs and reporting
- German Bundestag, DIP: Act amending the Supply Chain Due Diligence Act, printed paper 21/2474 (in German), status "referred"
- Directive (EU) 2026/470 (Omnibus I), Art. 4 to 6, and Directive (EU) 2025/794
- Regulation (EU) No 952/2013, Union Customs Code, Art. 9 and 60
- Directive 2005/29/EC on unfair commercial practices, Art. 6
Frequently asked questions
Do I need a responsible person in the EU for textiles from China?
Yes. Under Art. 16 GPSR a consumer product may only be placed on the market if an economic operator established in the EU is responsible for it, such as an EU-based manufacturer, the importer or an authorised representative. If you sell under your own brand and are based in the EU, you usually take on this role yourself.
Which language must the textile label be in?
In the official language of the member state where the product is sold to consumers (Art. 16(3) of Regulation 1007/2011). For Germany that is German.
May I write "100% cotton" if the fabric contains a little elastane?
No. "100%" or "pure" is only allowed for products made of a single fibre. Up to 2% of extraneous fibres is permitted if technically unavoidable and not added on purpose (Art. 7). Added elastane must be stated with its percentage.
Does the German Supply Chain Act apply to my company?
Directly only if you usually employ at least 1,000 people in Germany. Smaller companies can still be affected through requests from large customers. An amendment to the LkSG had not been adopted as of 12 November 2026.
When does the CSDDD apply?
Following the amendment by Directive (EU) 2026/470, member states must transpose the rules by 26 July 2028 and apply them from 26 July 2029. EU companies with more than 5,000 employees and more than EUR 1.5 billion worldwide net turnover are covered.
Is "Made in China" on the label mandatory?
There is no general EU obligation. A voluntary origin claim must not mislead consumers, however (Art. 6 of Directive 2005/29/EC).
