01 / Optimisation

Your supplier stays. Your purchasing gets better.

You already buy in China. We review your current offer, build a reliable basis for comparison and negotiate directly with your manufacturer.

Non-binding. You pay a share of the savings. If you save nothing, you pay nothing.

For companies with existing suppliers

Meeting room at a manufacturer in China
A direct look · Our work in China

The right starting point

A good price needs a fair comparison.

A cheaper quote does not help if material, workmanship or delivery terms turn out differently. That is why we start with your current specification. Only when the quotes are comparable do we talk to your manufacturer.

What we take on for you

  • Review of your current quotes and specifications
  • Comparison quotes on the same product basis
  • Negotiation with your existing manufacturer in China
  • A clear side-by-side of the terms
Selection of fabric swatches at the producer

What our work is built on

Personal contact.
Real product knowledge.

Felix and our sourcing team combine direct contact with factories and careful commercial preparation. Technical details and terms are looked at together. That makes it possible to explain what changes a quote.

Meet your team ↗

From enquiry to result

How we go about it.

Have your quote reviewed
  1. 01

    Understand your starting point

    You share the product, current quote, quantities and your experience so far.

  2. 02

    Make it comparable

    We clarify material, workmanship, packaging and terms, and collect suitable comparison quotes.

  3. 03

    Negotiate on site

    We discuss the room for movement directly with your manufacturer and document the result.

  4. 04

    Decide together

    You review the new terms and decide on the next steps.

Your result

You get a documented basis for your decision: what was discussed, which terms are possible and where the limits are.

In depth

When is it worth renegotiating with your existing manufacturer?

Renegotiating is worth it above all when your price has not been on the table for a long time. At many companies it was agreed once by email and hardly questioned since. Whether anything is possible in your case can only be said once someone has seen the quote, the quantity and the specification.

Typical starting points are:

  • You buy regularly from the same manufacturer in China and the price has not changed for years.
  • The manufacturer has raised prices and you do not want to switch.
  • You are about to sign a new contract and want someone on site to negotiate first.

For very small one-off orders, on the other hand, the effort is often out of proportion. We will tell you that honestly before you commission anything.

How do you make quotes comparable?

We only compare prices once material, workmanship, packaging and terms are on the same basis. A cheaper quote is worthless if a thinner fabric, a simpler seam or a later delivery date sits behind it.

That is why we start with your current specification. We clarify what the existing quote actually includes and, where needed, collect comparison quotes from other manufacturers of the same goods on that basis. You receive these quotes in writing, with prices. That way you can see what your manufacturer is being compared with.

How does the negotiation on site work?

We go to your manufacturer and negotiate in person at the factory, in Chinese. Our team lives in different regions of China and can usually reach the manufacturer in about an hour. That saves you the cost of flights, hotels and interpreters.

We act openly as your agent and negotiate on your behalf. A manufacturer is more likely to offer a better deal to someone sitting at the table than by email from Europe. We have also spoken to a great many manufacturers and know other factories that produce the same goods. If you want comparison quotes, we can use them to show your manufacturer what is available elsewhere.

How do you stop the manufacturer from taking the discount back?

By getting fabric, weight, workmanship and delivery dates written into the contract. Otherwise a manufacturer can make up for a price reduction with a thinner fabric or a later delivery.

We go through the technical and commercial points of the contract with you once before anything is negotiated. If you want to be on the safe side, you can also book quality control. We then compare the approved sample with running production at the factory.

What does optimisation cost and when do you pay?

You pay us a share of the savings, nothing more. If your new contract is not cheaper than the previous one, there is no cost. There is no fee for the analysis and no travel costs.

The basis is only the saving that is firmly agreed in the contract with the manufacturer. That can be a single order or a contract over one or two years. The size of the share depends on volume and effort. You will know the figure before we start.

We take no money from manufacturers. You continue to pay for the goods directly to your manufacturer. If you carry on ordering on your own after the contract, we take nothing more, and the saving is entirely yours.

What happens if the manufacturer does not agree?

Then it is your decision. You can sign with one of the comparison factories, or everything stays as it was. We do not push you to switch, and if no better price is possible, we tell you openly.

If your manufacturer raises the price again later, we renegotiate. If it is worthwhile, we suggest another manufacturer who makes the same goods for less. That is then a case for our sourcing service.

Which documents do we need from you?

For a first assessment, your current quote is enough. The following are helpful:

  • Product and specification (material, workmanship, packaging)
  • Quantities and order frequency
  • The current price and the manufacturer
  • Your experience and negotiations so far

On this basis we tell you whether we see room for movement. This is non-binding and free of charge. If you wish, we can also give you information about the manufacturer in advance and help set up the contract. Shipping and customs are not part of our services and continue to run through your forwarder.

In brief

A look at optimisation.

The principle as a short video, in English.

Preview of the purchasing optimisation explainer video

Good to know

Questions about Optimisation.

Do I have to change manufacturer?

No. Your existing manufacturer is the focus. Comparison quotes give us a basis for the conversation. You always decide whether to switch.

What does optimisation cost?

Our model gives us a share of the savings actually achieved. We agree the calculation basis, scope and period together before we start.

Are savings guaranteed?

No. After reviewing your documents, we assess whether there is sensible room for movement. Material, quality and delivery terms have to fit together.

We have bought from the same manufacturer for years and never renegotiated. How do I approach it without putting the relationship at risk?

Have someone negotiate who acts openly on your behalf and meets the manufacturer in person on site. You stay with the manufacturer and keep ordering directly from them. We speak the manufacturer's language, keep the tone factual and only use comparison quotes if you want us to.

My supplier in China has raised prices. Can someone on site renegotiate for me so that I do not have to switch?

Yes, that is exactly why we go to your manufacturer and negotiate in person at the factory. You do not have to switch. If you wish, we collect quotes from other manufacturers of the same goods so that the negotiation has a solid basis.

Is there a sourcing agent in China who only gets paid if they actually lower my price?

Yes, that is how we work. We receive a share of the saving that is firmly agreed in your new contract. If the contract is not cheaper, you pay nothing, not even analysis or travel costs. We take no money from manufacturers.

Is it worth hiring someone for a price negotiation in China, or can I manage it myself by email?

That depends on your volume and your relationship with the manufacturer. For small one-off orders, your own email is often enough. Hiring someone becomes worthwhile when the price has not been negotiated for a long time, you order regularly and you want someone sitting at the table in person, speaking Chinese. After reviewing your quote, we will tell you honestly whether it is worthwhile in your case.

How much can you realistically save with the same manufacturer in China?

We do not give a flat figure, because it depends on product, quantity, material and manufacturer. After reviewing your documents, we assess whether there is sensible room for movement. Only what is firmly agreed in the contract with the manufacturer counts as a saving.

I am worried my manufacturer will cut corners on fabric weight after giving me a discount. How do I protect myself?

Put fabric, weight, workmanship and delivery dates in the contract. We go through these points with you before the negotiation. In addition, we can compare the approved sample with running production at the factory.

I am about to sign a two-year contract with a factory in China. Should someone negotiate on site first?

Yes, before signing is the best time, because afterwards the price is set for the whole term. We negotiate running and new contracts, go through the contract with you and put fabric, weight, workmanship and delivery dates in writing. Send us the quote and the planned quantity.

Let us get specific

Let us talk about your Optimisation.

A few details about your project. Then we talk about what makes sense for you.

Have your quote reviewed

Non-binding. You pay a share of the savings. If you save nothing, you pay nothing.